Specification Guide
SBS Cryogenic Vials
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Cap Type | External thread cap | Internal thread cap | |||||||
| Volume (mL) | 0.5 | 0.75 | 1.0 | 2.0 | 4.0 | 6.0 | 8.0 | 0.5 | 1.0 |
| Overall height (mm) | 27.6 | 37.3 | 45.6 | 45.5 | 76.3 | 57.5 | 71.7 | 33.5 | 51.4 |
| Size parameters (mm) | 5.3 | 10 | 10.3 | 6.55 | |||||
| Outer diameter Φ (mm) | 8.85 | 12.85 | 17.8 | 8.7 | |||||
| Temperature Range | -196 to 121°C | -196 to 121°C | |||||||
Notes:
- After removing cryogenic vials from liquid nitrogen, use the NEST thawing device to ensure better QR code recognition.
- Due to varying densities of freezing media, it is recommended that the filling volume not exceed 90%.
- Make sure the cap is tightly closed before freezing to prevent liquid nitrogen from entering.
- Always wear proper protective equipment when handling vials from liquid nitrogen to ensure laboratory safety.
Storage conditions: Temperature range: –196 *C (with screw cap) to 121 °C.
All polypropylene tubes are suitable for low-temperature storage, except direct immersion in liquid nitrogen.
Warning: Do not immerse NEST sample tubes directly in liquid nitrogen. Liquid nitrogen can seep inside and cause tube rupture and sample loss. Storage in the vaporphase of liquid nitrogen is recommended.
All polypropylene tubes are suitable for low-temperature storage, except direct immersion in liquid nitrogen.
Warning: Do not immerse NEST sample tubes directly in liquid nitrogen. Liquid nitrogen can seep inside and cause tube rupture and sample loss. Storage in the vaporphase of liquid nitrogen is recommended.
SBS 3-Code Cryogenic Tube – Rack Package
Rack Package
| Cat. No. | Volume(mL) | Cap Type | /Rack | Racks /Case | Compatible Cap Inserts No. |
| 612751 | 1 | Extemal thread | 96 | 10 | None |
| 612851 | 2 | Extemal thread | 48 | 10 | 61120x series |